How to Reset a Neff Dishwasher

A reset can clear temporary faults and restore normal operation.

🔄 Note — A reset clears temporary glitches caused by power fluctuations or minor software errors. It will not fix mechanical faults. If the same error code returns after resetting, the underlying component needs to be investigated.

How to Reset Your Neff Dishwasher

1

Turn the dishwasher off using the power button.

2

Switch the appliance off at the mains wall socket.

3

Leave the machine unplugged for at least 2 to 3 minutes. This allows the control board to fully discharge and reset.

4

Plug the machine back in and switch it on at the mains.

5

Select a new programme and press start. If the fault was temporary, the machine should run normally.

Cancelling a programme mid-cycle
If you need to cancel a running programme, press and hold the start button for 3 to 5 seconds until the programme is cancelled. The machine will drain any water before returning to standby. Refer to your model’s user manual for the exact method as this can vary between models.
When will a reset not fix the problem?
If the same error code returns after a reset, the fault is likely with a physical component such as the drain pump, heating element, water inlet valve or door sensor. Use the error code guide below to identify the fault and find out what checks you can carry out before calling an engineer.
Neff Dishwasher Error Codes — Full Guide
View Codes

🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon

♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.