Hisense Washing Machine Error Code E1 Meaning and Possible Fixes
Hisense Washing Machine Error Code E1
If your Hisense washing machine displays error code E1, the appliance has detected a temperature sensor fault or that the inlet water is too cold. There are checks you can carry out before calling an engineer.
View all Hisense washing machine error codes
What the E1 Error Code Means
The E1 error code indicates a temperature sensor error on models that use the E-code system. On some Hisense models this code appears when the inlet water temperature is too cold for the selected programme to proceed correctly. On others it indicates a fault with the NTC temperature sensor itself. The machine stops the programme and advises repeating the wash — if the error reappears, a service technician should be contacted.
Common Reasons This Error Appears
Inlet water temperature too cold
If the cold water supply is exceptionally cold — for example during winter — some Hisense models may display E1 when the water temperature is below the threshold needed for the selected programme.
Faulty NTC temperature sensor
The temperature sensor monitoring water temperature may have failed and is providing readings outside the expected range.
Wiring fault
A loose or damaged connection to the temperature sensor can cause incorrect or no readings to be reported to the control board.
Safe Checks You Can Try
Try restarting the programme
Hisense advises repeating the washing programme as a first step. Switch the machine off, wait a few minutes, then restart the cycle. If the error does not reappear, the fault was likely caused by a temporary cold water or sensor condition.
Check the water supply temperature
If you are experiencing the error in very cold weather, try running a hot tap nearby for a minute before starting the machine to allow warmer water into the supply pipe.
If the error reappears after restarting, Hisense advises calling a service technician.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Hisense washing machine parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the E1 error reappears after restarting the programme, the temperature sensor or associated wiring will need to be tested and replaced by a qualified engineer.
Internal components should only be inspected or repaired by trained professionals.
Note on Hisense Error Code Systems
Some Hisense washing machine models use E-codes while others use F-codes. If your machine displays F-codes, please refer to the full Hisense washing machine error code guide for the relevant code.
Related Hisense Washing Machine Error Codes
You may also encounter related issues indicated by Hisense Washing Machine Error Code E2 and Hisense Washing Machine Error Code E3.
Error codes may vary slightly between different Hisense washing machine models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.