Beko Washing Machine Not Filling With Water
Beko Washing Machine Not Filling With Water
If your Beko washing machine is not filling with water, the appliance is unable to draw in the water it needs to start or continue the wash cycle. There are several checks you can carry out at home before calling an engineer.
Washing machine not filling with water — all brands
View all Beko washing machine error codes
Beko Error Codes Related To Filling
If your Beko washing machine is displaying an error code alongside the fill fault, use the links below to find out what it means.
Beko Error Code E04 — water inlet valve fault
Beko Error Code E07 — water level sensor fault
Beko Error Code E08 — water supply fault or filling timeout
Beko Error Code E13 — water level system fault
Why Is My Beko Washing Machine Not Filling With Water?
When a Beko washing machine fails to fill, the cycle cannot start or progress correctly. Beko machines display E04 or E08 when a water inlet or supply fault is detected. Before investigating further, check whether an error code is showing on the display.
Common Causes
Water supply tap turned off or not fully open
The most common cause. The tap supplying the washing machine must be fully open. It is usually located behind or beneath the machine.
Kinked or blocked inlet hose
If the water inlet hose is kinked or blocked, water cannot flow into the machine freely.
Blocked inlet filter
A small mesh filter at the water inlet valve connection can become clogged with debris and restrict water flow. This is a very common cause of E08 on Beko machines.
Faulty water inlet valve
If the inlet valve has failed, error code E04 will typically be displayed. Water will not enter the machine even if the supply is fully open.
Water level sensor fault
If E07 or E13 is displayed, there is a fault with the water level sensing system that will require professional attention.
Checks To Try Before Calling An Engineer
Check the water supply tap
Ensure the tap on the supply pipe behind or beneath the machine is fully open.
Check the inlet hose
Inspect the water inlet hose for any kinks or crushing and straighten if necessary.
Clean the inlet filter
Turn off the water supply. Disconnect the inlet hose from the back of the machine. Remove the small mesh filter from the inlet connection, rinse under running water and refit before reconnecting the hose.
Reset the machine
Switch off at the mains and leave unplugged for a few minutes. Plug back in and restart the cycle.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Beko washing machine parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the fault persists after checking the supply, hose and filter, the water inlet valve or water level sensor is likely faulty and will need to be diagnosed by a qualified engineer. Internal components should only be inspected or repaired by trained professionals.
Related Beko Guides
Beko washing machine error codes
Beko washing machine not draining
Beko washing machine not spinning
Related Guides
Washing machine not filling with water — all brands
Samsung washing machine not filling with water
LG washing machine not filling with water
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.