AEG Tumble Dryer Error Codes

CD — Door latch problem

CE — Electronics fault

CF — Electronics fault

C2 — Condensation drain problem

C6 — Moisture sensor problem

C8 — Temperature sensor fault

E20 — Condensation drain problem

E40 — Door lock problem

E45 — Door lock problem

E50 — Motor problem

E60 — Heating problem

E70 — Temperature sensor fault

E80 — Electronic fault

EH0 — Power supply problem

E9E — Overheating or power supply problem

ECA — Steam tank empty — ProSteam models

Err — Incompatible setting or mid-cycle change

Why is my AEG tumble dryer showing an error code?

The machine has detected a fault. Select the code above to identify the cause and find out what action to take.

Can I reset my AEG tumble dryer?

Yes — turn it off at the mains for a few minutes. If the same code reappears, the underlying fault needs to be investigated.

Do I need an engineer for every error code?

Not always — many issues can be resolved with simple checks before calling a technician. Select the code above to see what you can do.