AEG Tumble Dryer Error Code C6 Meaning and Possible Fixes
AEG Tumble Dryer Error Code C6
If your AEG tumble dryer displays error code C6, it indicates a moisture sensor problem.
AEG tumble dryers use moisture sensors to detect when laundry is dry and end the cycle at the right time. If the appliance detects a fault with these sensors, it may stop the cycle and display the C6 error code.
View all AEG tumble dryer error codes
What the C6 Error Means
The C6 error code generally indicates that the moisture sensor is not reading correctly. This may cause the dryer to stop early, run too long, or fail to complete a cycle.
Common Reasons This Error Appears
Dirty moisture sensor bars
The sensor bars inside the drum may be coated with limescale or fabric softener residue, preventing accurate readings.
Faulty moisture sensor
The moisture sensor itself may have failed and may need replacing.
Wiring fault
Wiring connected to the sensor or control module may be loose or damaged.
Electronic control board fault
The control board may not be reading the sensor signal correctly.
Safe Checks You Can Try
Clean the moisture sensor bars
Locate the two metal sensor bars inside the drum, usually near the door opening, and clean them gently with a soft cloth and a little white vinegar or mild detergent to remove any residue.
Avoid overloading
An overloaded drum can prevent laundry from making proper contact with the sensor bars. Try reducing the load size.
Clean the lint filter
Remove and clean the lint filter thoroughly as excess lint can affect sensor readings.
Restart the tumble dryer
Turn the appliance off and disconnect it from the mains for several minutes before restarting.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible AEG tumble dryer parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the C6 error code continues to appear after trying the checks above, the moisture sensor or electronic control board may need replacing and an engineer visit would be recommended.
Internal components should only be inspected or repaired by trained professionals.
Related AEG Tumble Dryer Error Codes
You may also encounter related issues indicated by AEG Tumble Dryer Error Code C8 and AEG Tumble Dryer Error Code E70.
Error codes may vary slightly between different AEG tumble dryer models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.