Siemens Dishwasher Error Codes

Find out what your error code means and what checks you can carry out before calling a technician.

🔄 Try this first — Switch the dishwasher off, leave it for 2 to 3 minutes, then turn it back on and start a new cycle. If the error persists, turn off the water tap and disconnect from the mains before contacting an engineer.

Siemens Dishwasher Error Code List

E01 Faulty electronics — programme interrupted

View Guide

E02 Faulty electronics — programme interrupted

View Guide

E03 Faulty electronics — programme interrupted

View Guide

E04 Faulty electronics — programme interrupted

View Guide

E05 Faulty electronics — programme interrupted

View Guide

E06 Faulty door sensor or electronics fault

View Guide

E07 Drying system fault

View Guide

E08 Water level in rinse bath too low

View Guide

E09 Heating system fault

View Guide

E10 Drying system fault

View Guide

E11 Heating system fault

View Guide

E12 Heating element calcified or soiled

View Guide

E14 Water protection activated — filling fault

View Guide

E15 Water detected in base pan

View Guide

E16 Filling system — water inflow fault

View Guide

E18 Water inlet fault

View Guide

E19 Dispenser fault

View Guide

E20 Rinsing circuit — circulating pump fault

View Guide

E21 Rinsing circuit — circulating pump fault

View Guide

E22 Filter system soiled or clogged

View Guide

E23 Waste water pump fault

View Guide

E24 Drain fault

View Guide

E25 Drain fault

View Guide

E26 Water circuit fault — defective component

View Guide

E27 Mains voltage too low — power supply fault

View Guide

E31 Drying system fault — water not heating

View Guide

No Error Code Showing?

Browse the fault guides below to identify your problem.

Dishwasher Not DrainingFault Guide
Dishwasher Not Filling With WaterFault Guide
Dishwasher Stopping Mid-CycleFault Guide
Dishwasher LeakingFault Guide

Frequently Asked Questions

Why is my Siemens dishwasher showing an error code?

Error codes are displayed when the machine detects a fault. Select the code above to identify the cause and find out what action to take.

Can I reset my Siemens dishwasher?

Yes — switch it off and wait a few minutes. If the error persists, turn off the water tap and disconnect from the mains before investigating further.

Do I need an engineer for every error code?

Not always — some faults such as a blocked filter (E22) or low water level can be resolved with simple checks before calling a technician.

🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon

♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.