Hotpoint Tumble Dryer Error Codes

Find out what your error code means and what checks you can carry out before calling a technician.

🔄 Try this first — Turn the tumble dryer off at the mains, leave it for 2 to 3 minutes, then turn it back on and start a new cycle. This clears many temporary faults.

Hotpoint Tumble Dryer Error Code List

F01 — Electronic control board fault

F02 — Motor circuit fault

F03 — Temperature sensor fault

F05 — Drain or pump fault

F06 — Door lock fault

F07 — Heating circuit fault

F08 — Heater relay fault

F09 — Software or configuration fault

F11 — Pump circuit fault

F12 — Communication fault between control boards

F13 — Dryer temperature sensing fault

F16 — Drum position sensor fault

F18 — Internal data error

No Error Code Showing?

Some Hotpoint tumble dryers indicate faults via flashing lights rather than a display code.

Hotpoint Tumble Dryer Flashing LightsView Guide
Tumble Dryer Not Heating UpFault Guide
Tumble Dryer Stopping Mid-CycleFault Guide
Tumble Dryer Not Drying ProperlyFault Guide

Frequently Asked Questions

Why is my Hotpoint tumble dryer showing an error code?

Error codes are displayed when the machine detects a fault. Select the code above to identify the cause and find out what action to take.

Can I reset my Hotpoint tumble dryer?

Yes — turn it off at the mains for a few minutes. If the same code reappears, the underlying fault needs to be investigated.

Do I need an engineer for every error code?

Not always — many issues can be resolved with simple checks before calling a technician.

🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon

♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.