How to Reset a Bush Tumble Dryer

A reset can clear temporary electronic faults and restore normal operation.

🧹 Clean the filter first — A blocked lint filter is the most common cause of error codes on Bush tumble dryers. Clean it after every cycle, empty the water tank and clean the condenser drawer before attempting a reset.

How to Reset Your Bush Tumble Dryer

1

Turn the tumble dryer off using the power button.

2

Unplug the appliance from the mains socket.

3

Press and hold the Start/Pause button for 10 seconds.

4

Wait 30 seconds to allow the internal electronics to reset.

5

Plug the tumble dryer back into the mains socket.

6

Turn the appliance back on and restart your programme. If the fault was temporary, the dryer should return to normal operation.

When will a reset not fix the problem?
A reset clears temporary electronic faults. It will not fix mechanical faults or failed components. If the error code returns after cleaning the filters and resetting, the dryer has a specific fault that requires further investigation using the guide below.
Bush Tumble Dryer Error Codes — Full Guide
View Codes

🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon

♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.