Miele Washing Machine Not Filling With Water
Miele Washing Machine Not Filling With Water
If your Miele washing machine is not filling with water, the appliance is unable to draw in the water it needs to start or continue the wash cycle. There are several checks you can carry out at home before calling an engineer.
Washing machine not filling with water — all brands
View all Miele washing machine fault codes
Miele Fault Codes Related To Filling
If your Miele washing machine is displaying a fault code alongside the fill fault, use the link below to find out what it means.
Miele Fault Code F10 — water inlet fault
Why Is My Miele Washing Machine Not Filling With Water?
When a Miele washing machine fails to fill, the cycle cannot start or progress correctly. Miele machines display F10 when a water inlet fault is detected. Before investigating further, check whether a fault code is showing on the display.
Common Causes
Water supply tap turned off or not fully open
The most common cause. The tap supplying the washing machine must be fully open. It is usually located behind or beneath the machine.
Kinked or blocked inlet hose
If the water inlet hose is kinked or blocked, water cannot flow into the machine freely.
Blocked inlet filter
A small mesh filter at the water inlet valve connection can become clogged with debris and restrict water flow. This is a very common cause of F10 on Miele machines.
Low water pressure
If household water pressure is unusually low, the machine may not be able to fill at the required rate.
Faulty water inlet valve
If the inlet valve has failed, water will not enter the machine even if the supply is fully open.
Checks To Try Before Calling An Engineer
Check the water supply tap
Ensure the tap on the supply pipe behind or beneath the machine is fully open.
Check the inlet hose
Inspect the water inlet hose for any kinks or crushing and straighten if necessary.
Clean the inlet filter
Turn off the water supply. Disconnect the inlet hose from the back of the machine. Remove the small mesh filter from the inlet connection, rinse under running water and refit before reconnecting the hose.
Reset the machine
Switch off at the mains and leave unplugged for at least 2 minutes. Plug back in and restart the cycle.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Miele washing machine parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the fault persists after checking the supply, hose and filter, the water inlet valve is likely faulty and will need to be diagnosed by a qualified engineer. Internal components should only be inspected or repaired by trained professionals.
Related Miele Guides
Miele washing machine fault codes
Miele washing machine not draining
Miele washing machine not spinning
Related Guides
Washing machine not filling with water — all brands
Neff washing machine not filling with water
Hisense washing machine not filling with water
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.