How to Reset a Bush Tumble Dryer

If your Bush tumble dryer is displaying an error code or not responding correctly, performing a reset can sometimes clear temporary electronic faults and restore normal operation.

A reset will not repair mechanical or electrical failures, but it can resolve temporary glitches caused by power interruptions or control board issues.

Before You Reset — Clean the Filter First

Before attempting a reset, always check and clean the lint filter. A blocked lint filter is the most common cause of error codes on Bush condenser tumble dryers. The lint filter must be cleaned after every single drying cycle. Also empty the water tank and clean the condenser drawer if you have not done so recently.

How to Reset a Bush Tumble Dryer

1. Turn the tumble dryer off using the power button.
2. Unplug the appliance from the mains socket.
3. Press and hold the Start/Pause button for 10 seconds.
4. Wait 30 seconds to allow the internal electronics to reset.
5. Plug the tumble dryer back into the mains socket.
6. Turn the appliance back on and restart your programme.

If the problem was caused by a temporary fault, the tumble dryer should return to normal operation.

When a Reset Will Not Fix the Problem

If the error code returns after cleaning the filters and resetting the appliance, this usually indicates a specific fault that requires further troubleshooting.

You can view the full list of Bush tumble dryer error codes and possible fixes here.

Bush tumble dryer error codes — complete guide

🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon

♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.