Zanussi Tumble Dryer Error Code E71 Meaning and Possible Fixes
Zanussi Tumble Dryer Error Code E71
If your Zanussi tumble dryer displays error code E71, it indicates a temperature sensor fault.
Zanussi tumble dryers use multiple temperature sensors to monitor heat levels during a drying cycle. If the appliance detects a fault with the NTC1 sensor specifically, it may stop the cycle and display the E71 error code.
View all Zanussi tumble dryer error codes
What the E71 Error Means
The E71 error code indicates a fault with the NTC1 temperature sensor. This sensor monitors the temperature inside the drum and if it fails the dryer may stop mid cycle or trigger a forced cooling cycle.
Common Reasons This Error Appears
Faulty NTC1 temperature sensor
The NTC1 sensor may have failed and is no longer sending accurate temperature readings to the control board.
Blocked filters
A blocked lint filter or condenser can cause overheating which may trigger the sensor fault.
Wiring fault
Wiring connected to the NTC1 sensor or control module may be loose or damaged.
Electronic control board fault
The control board may not be reading the NTC1 sensor signal correctly.
Safe Checks You Can Try
Clean the lint filter
Remove and clean the lint filter thoroughly. A blocked filter is one of the most common causes of temperature related faults.
Clean the condenser
Remove and rinse the condenser under running water and allow it to dry fully before replacing.
Check ventilation
Make sure the tumble dryer has adequate space around it for ventilation and is not positioned against a wall or in an enclosed space.
Restart the tumble dryer
Turn the appliance off and disconnect it from the mains for several minutes before restarting.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible Zanussi tumble dryer parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the E71 error code continues to appear after trying the checks above, the NTC1 temperature sensor or electronic control board may need replacing and an engineer visit would be recommended.
Internal components should only be inspected or repaired by trained professionals.
Related Zanussi Tumble Dryer Error Codes
You may also encounter related issues indicated by Zanussi Tumble Dryer Error Code E70 and Zanussi Tumble Dryer Error Code E72.
Error codes may vary slightly between different Zanussi tumble dryer models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.