Zanussi Tumble Dryer Error Code E60 Meaning and Possible Fixes
Zanussi Tumble Dryer Error Code E60
If your Zanussi tumble dryer displays error code E60, it indicates a heating problem.
Zanussi tumble dryers use a heating element to generate warm air to dry your laundry. If the appliance detects a fault with the heating system, it may stop the cycle and display the E60 error code.
View all Zanussi tumble dryer error codes
What the E60 Error Means
The E60 error code generally indicates that the dryer is not reaching the correct temperature during a drying cycle. This may cause the dryer to stop mid cycle or fail to dry laundry properly.
Common Reasons This Error Appears
Faulty heating element
The heating element may have failed and is no longer generating heat correctly.
Blocked filters
A blocked lint filter or condenser can restrict airflow and prevent the dryer from heating correctly.
Faulty thermostat
The thermostat that regulates the temperature may have failed.
Wiring fault
Wiring connected to the heating element or control module may be loose or damaged.
Electronic control board fault
The control board may not be sending the correct signal to the heating element.
Safe Checks You Can Try
Clean the lint filter
Remove and clean the lint filter thoroughly. A blocked filter is one of the most common causes of heating faults.
Clean the condenser
Remove and rinse the condenser under running water and allow it to dry fully before replacing.
Check ventilation
Make sure the tumble dryer has adequate space around it for ventilation and is not positioned against a wall or in an enclosed space.
Restart the tumble dryer
Turn the appliance off and disconnect it from the mains for several minutes before restarting.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible Zanussi tumble dryer parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the E60 error code continues to appear after trying the checks above, the heating element, thermostat or electronic control board may need replacing and an engineer visit would be recommended.
Internal components should only be inspected or repaired by trained professionals.
Related Zanussi Tumble Dryer Error Codes
You may also encounter related issues indicated by Zanussi Tumble Dryer Error Code E63 and Zanussi Tumble Dryer Error Code E50.
Error codes may vary slightly between different Zanussi tumble dryer models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.