Whirlpool Tumble Dryer Flashing Lights
Identify your flashing light combination and find out what it means before calling an engineer.
🔄 Try this first — Turn the tumble dryer off at the mains, leave it for 2 to 3 minutes, then turn it back on and start a new cycle. This clears many temporary faults.
Whirlpool Tumble Dryer Flashing Light Combinations
LED 4 flashing
F01 — Electronic circuit board fault
LED 3 flashing
F02 — Motor circuit fault
LED 3 and LED 4 flashing
F03 — Temperature sensing fault
LED 2 and LED 4 flashing
F05 — Waste pipe blockage or pump issue
LED 2 and LED 3 flashing
F06 — Door lock fault
LED 2, LED 3 and LED 4 flashing
F07 — Electronic circuit board / heating circuit fault
LED 1 flashing
F08 — Heater fault
LED 1 and LED 4 flashing
F09 — Software fault
LED 1, LED 2 and LED 4 flashing
F11 — Pump circuit fault
LED 1 and LED 2 flashing
F12 — Electronic control fault
LED 1, LED 2, LED 3 and LED 4 flashing
F15 — Heater control fault
LED 5 flashing
F16 — Drum position sensor fault — top loading machines only
LED 3 flashing — static light scenario
F18 — Internal data error
Frequently Asked Questions
Why are my tumble dryer lights flashing?
Flashing lights indicate the appliance has detected a fault during operation. Match the flashing pattern above to identify the fault code.
Can I reset my Whirlpool tumble dryer?
Yes — turn it off at the mains for a few minutes. If the lights continue flashing after restarting, use the guide above to identify the fault.
Do flashing lights always mean a serious fault?
Not always — many issues can be resolved with simple checks before calling a technician.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.
