Siemens Tumble Dryer Error Code E08 Meaning and Possible Fixes
Siemens Tumble Dryer Error Code E08
If your Siemens tumble dryer displays error code E08, this indicates a sensor fault within the appliance.
Siemens tumble dryers use a range of sensors to monitor temperature, moisture levels and other operating conditions during a drying cycle. If one of these sensors develops a fault, the machine will stop the cycle and display the E08 error code.
View all Siemens tumble dryer error codes
What the E08 Error Means
The E08 error code indicates that a sensor within your Siemens tumble dryer has developed a fault. The sensor may be giving incorrect readings or may have failed completely. This fault will need to be investigated by a qualified engineer.
Common Reasons This Error Appears
Faulty temperature sensor
The NTC temperature sensor monitors the heat inside the drum. If it has failed or is giving incorrect readings, the machine may stop and display this error.
Dirty moisture sensor
The moisture sensor strips inside the drum detect when laundry is dry. If they are coated with fabric softener residue they may give false readings and trigger an error.
Wiring fault
Loose or damaged wiring connected to a sensor can interrupt the signal and cause this error to appear.
Electronic control board fault
In some cases the control board itself may have developed a fault affecting how it reads sensor data.
Safe Checks You Can Try
Clean the moisture sensor strips
The moisture sensor strips are usually located inside the drum near the door opening. Wipe them gently with a soft cloth dampened with a small amount of white vinegar to remove any residue, then wipe dry.
Clean the lint filter and condenser
Ensure the lint filter and condenser are clean as blockages can affect temperature readings and contribute to sensor errors.
Restart the tumble dryer
Turn the appliance off at the mains and leave it for several minutes before restarting. This can clear a temporary fault.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Siemens tumble dryer parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the E08 error code continues to appear after trying the checks above, the sensor or control board will need to be inspected and replaced by a qualified engineer. This fault cannot be reliably diagnosed without professional assistance.
Internal components should only be inspected or repaired by trained professionals.
Related Siemens Tumble Dryer Error Codes
You may also encounter related issues indicated by Siemens Tumble Dryer Error Code E09 and Siemens Tumble Dryer Error Code E10.
Error codes may vary slightly between different Siemens tumble dryer models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.