Bush Tumble Dryer Error Code E05 Meaning and Possible Fixes

Bush Tumble Dryer Error Code E05

If your Bush tumble dryer is displaying error code E05, the appliance has detected a problem with a sensor. In many cases this can be resolved by cleaning the filters and humidity sensors before considering an engineer visit.

View all Bush tumble dryer error codes

What the E05 Error Code Means

The E05 error code indicates that a sensor within the dryer is not operating correctly. This is most commonly associated with the humidity sensors inside the drum, which monitor moisture levels in the laundry to determine when drying is complete. A build-up of residue from fabric softener or detergent on these sensors can cause inaccurate readings and trigger E05. A blocked condenser or filter can also contribute to this fault.

Common Reasons This Error Appears

Dirty or coated humidity sensors
Fabric softener residue can build up on the humidity sensors inside the drum over time, preventing them from reading moisture levels accurately.

Blocked lint filter
A blocked lint filter restricts airflow and affects the dryer’s ability to monitor and regulate drying conditions. The lint filter must be cleaned after every single drying cycle.

Full water tank
A full condensate water tank can affect sensor performance. Always empty the tank before starting a new cycle.

Blocked condenser
A clogged condenser reduces the efficiency of the drying process and can contribute to sensor faults.

Faulty sensor
If the sensor itself has failed, it will need to be replaced by a qualified engineer.

Safe Checks You Can Try

Clean the lint filter
Remove the lint filter and clear all fluff and debris. Rinse under water if needed and allow to dry before refitting.

Empty the water tank
Pull out the condensate water tank, empty it fully and refit it firmly.

Clean the condenser
Remove the condenser drawer, rinse it thoroughly under running water, allow it to dry completely and refit it firmly into the appliance.

Wipe the humidity sensors
The humidity sensors are the two metal strips on the inside front of the drum. Wipe them firmly with a clean damp cloth to remove any fabric softener or detergent residue.

Reset the machine
Unplug the appliance, hold down the Start/Pause button for 10 seconds, wait 30 seconds, then plug back in and retry.

If You Need Spare Parts

If you are confident carrying out the repair yourself, compatible Bush tumble dryer parts are available on Amazon with next day delivery.

Always check your model number before ordering to ensure compatibility.

When To Contact A Professional

If the E05 error persists after cleaning the sensors, filters and condenser, the sensor itself has likely failed and will need to be inspected and replaced by a qualified engineer. Internal components should only be inspected or repaired by trained professionals.

Related Bush Tumble Dryer Error Codes

Bush Tumble Dryer Error Code E03

Bush Tumble Dryer Error Code E04

Bush Tumble Dryer Error Code E06

Error codes may vary between different Bush tumble dryer models. Always consult the user manual for your specific appliance.

🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon

♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.