Zanussi Tumble Dryer Stopping Mid Cycle
Zanussi Tumble Dryer Stopping Mid-Cycle
If your Zanussi tumble dryer is stopping mid-cycle before the programme has finished, there are several checks you can carry out at home before calling an engineer.
Tumble dryer stopping mid cycle — all brands
View all Zanussi tumble dryer error codes
Why Is My Zanussi Tumble Dryer Stopping Mid-Cycle?
A tumble dryer that stops mid-cycle is often doing so as a safety precaution. The most common cause is the thermal overload cutout tripping due to overheating from a blocked filter or restricted airflow.
Common Causes
Thermal overload cutout tripped
The most common cause. If the dryer overheats due to a blocked lint filter, blocked condenser or restricted exhaust, the thermal cutout will trip and stop the machine to prevent a fire risk.
Blocked lint filter
A clogged lint filter restricts airflow and causes the dryer to overheat, triggering the thermal cutout.
Blocked condenser (condenser dryers)
A blocked condenser restricts airflow and causes overheating.
Door fault
If the door latch fails mid-cycle, the machine will stop as a safety precaution.
Motor overheating
If the motor overheats, it may have a built-in thermal protector that cuts power until it cools down.
Checks To Try Before Calling An Engineer
Clean the lint filter
Always clean the lint filter before every cycle. A blocked filter is the most common cause of mid-cycle stops.
Clean the condenser (condenser dryers)
Remove and rinse the condenser thoroughly.
Check the exhaust hose (vented dryers)
Ensure the exhaust hose is not kinked, blocked or excessively long.
Allow to cool
If the machine has overheated, allow it to cool completely for 30 minutes before trying again.
Reset the machine
Switch off at the mains, unplug for a few minutes, then try again.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Zanussi tumble dryer spare parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the machine repeatedly stops mid-cycle after cleaning the filters and checking airflow, the thermal cutout or motor may need replacing by a qualified engineer.
Related Zanussi Guides
Zanussi tumble dryer error codes
Zanussi tumble dryer not heating up
Zanussi tumble dryer drum not spinning
Related Guides
Tumble dryer stopping mid cycle — all brands
Aeg tumble dryer stopping mid cycle
Electrolux tumble dryer stopping mid cycle
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.