Hotpoint Tumble Dryer Flashing Lights Error Codes
If your Hotpoint tumble dryer lights are flashing, it usually means the appliance has detected a fault.
This guide explains what different flashing light combinations mean and what you can check before calling an engineer.
Try this first (Quick Reset)
- Turn the tumble dryer off at the mains
- Leave it for 2–3 minutes
- Turn it back on and start a new cycle
This can clear temporary faults.
Hotpoint Tumble Dryer Flashing Light Combinations
LED 1 flashing – Hotpoint Tumble Dryer F01 – Motor circuit fault
LED 3 flashing – Hotpoint Tumble Dryer F03 – Temperature sensor (thermistor) fault
LED 1 and LED 3 flashing – Hotpoint Tumble Dryer F05 – Pump fault or blocked drainage system
LED 2 and LED 3 flashing – Hotpoint Tumble Dryer F06 – Door lock system fault
LED 1, 2 and 3 flashing – Hotpoint Tumble Dryer F07 or F08 – Heating circuit or heating element fault
LED 4 flashing – Hotpoint Tumble Dryer F09 – Control board software or firmware fault
LED 1 and LED 5 flashing – Hotpoint Tumble Dryer F10 – Heating circuit wiring fault
LED 2 and LED 5 flashing – Hotpoint Tumble Dryer F11 – Pump circuit fault or continuity problem
LED 3 and LED 5 flashing – Hotpoint Tumble Dryer F12 – Communication fault between the control module and the display board
LED 4 and LED 5 flashing – Hotpoint Tumble Dryer F13 – Rear thermistor temperature sensor fault
LED 1, 4 and 5 flashing – Hotpoint Tumble Dryer F14 – Heating element fault
All LEDs flashing – Possible control board or communication error
What To Do If Your Hotpoint Tumble Dryer Lights Are Flashing
If the lights continue to flash after resetting the machine, use the combinations above to identify the fault and follow the full guide for that error code.
These guides explain the likely causes and checks you can carry out.
Common issues linked to flashing lights include:
- Tumble dryer not heating
- Tumble dryer not spinning
- Dryer stopping mid-cycle
- Dryer taking too long to dry
These problems are often connected to the fault codes above.
Why are my tumble dryer lights flashing?
Flashing lights indicate the appliance has detected a fault during operation.
Can I reset my Hotpoint tumble dryer?
Yes – turning it off at the mains for a few minutes can clear temporary faults.
Do flashing lights always mean a serious fault?
Not always – many issues can be resolved with simple checks.
Hotpoint tumble dryer error codes explained
How to reset a Hotpoint tumble dryer
Browse all Hotpoint appliance error codes
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.