Hoover Washing Machine Not Spinning
Hoover Washing Machine Not Spinning
If your Hoover washing machine is not spinning, the drum is failing to reach the required speed at the end of the cycle, leaving your laundry soaking wet. This is a common fault and there are several checks you can carry out before calling an engineer.
Washing machine not spinning — all brands
View all Hoover washing machine error codes
Hoover Error Codes Related To Spinning
If your Hoover washing machine is displaying an error code alongside the spin fault, use the links below to find out what it means.
Hoover Error Code E03 — drainage fault preventing spin
Hoover Error Code E06 — unbalanced load detected
Hoover Error Code E07 — motor fault
Hoover Error Code E08 — motor overload
Why Is My Hoover Washing Machine Not Spinning?
When a Hoover washing machine fails to spin, the laundry is left saturated with water at the end of the cycle. The machine may complete the wash programme but skip or cut short the spin. Hoover machines display E06 when an unbalanced load is detected and E07 or E08 when a motor fault is causing the issue. Check the display for any error codes before investigating further.
Common Causes
Unbalanced load
The most common cause. If laundry is bunched together on one side of the drum, the machine will detect excessive vibration and display E06, reducing or cancelling the spin to protect itself.
Drainage fault
A Hoover washing machine will not spin if it cannot drain the water first. If E03 is displayed, check the pump filter and drain hose.
Overloaded drum
An overloaded drum prevents the laundry from moving freely, which can cause the machine to struggle to reach spin speed.
Door not fully closed
The machine will not spin if the door lock is not fully engaged.
Motor fault
If E07 or E08 is displayed, the motor or motor overload protection has been triggered and will need professional attention.
Checks To Try Before Calling An Engineer
Redistribute the load
Open the door and rearrange the laundry evenly around the drum. Select a spin-only programme and try again.
Clean the pump filter
Located behind a small cover panel at the bottom front of the machine. Place towels beneath it before opening. Twist anticlockwise to remove, clear any debris and refit securely.
Check the door
Ensure the door is firmly closed and nothing is caught in the seal.
Reset the machine
Switch off at the mains and leave unplugged for a few minutes. Plug back in and try a spin-only programme.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Hoover washing machine parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the machine still fails to spin after the above checks, the fault is likely mechanical or electrical and will need to be diagnosed by a qualified engineer. Internal components should only be inspected or repaired by trained professionals.
Related Hoover Guides
Hoover washing machine error codes
Hoover washing machine not draining
Hoover washing machine leaking
Related Guides
Washing machine not spinning — all brands
LG washing machine not spinning
Candy washing machine not spinning
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.