Bush Washing Machine Error Code E04 Meaning and Possible Fixes
Bush Washing Machine Error Code E04
If your Bush washing machine is displaying error code E04, the appliance has detected that there is an excessive amount of water inside the drum. The machine will attempt to drain this water automatically before stopping.
View all Bush washing machine error codes
What the E04 Error Code Means
The E04 error code indicates that the water level inside the machine has risen higher than expected. This can be caused by too much foam from detergent, a fault with the water inlet valve allowing water to continue entering the drum, or a problem with the pressure sensor that monitors water levels. When E04 appears, the machine will automatically attempt to discharge the excess water. Once it has completed the draining process, turn the machine off and unplug it before investigating further.
Common Reasons This Error Appears
Too much detergent or wrong detergent type
Using excess detergent or a detergent not designed for automatic washing machines can cause excessive foaming, which the pressure sensor may interpret as overfilling.
Faulty water inlet valve
If the water inlet valve is not closing properly, water can continue to enter the drum even when the machine is not actively filling.
Faulty pressure sensor
The pressure sensor monitors the water level in the drum. If it is malfunctioning, it may incorrectly report an overfill condition even when the water level is normal.
Safe Checks You Can Try
Allow the machine to drain
When E04 appears, allow the machine to complete its automatic draining process. Do not interrupt this.
Turn off and unplug the machine
Once draining is complete, switch the machine off and unplug it from the mains. Turn off the water supply tap.
Check your detergent
Ensure you are using a detergent designed for automatic washing machines and that you are using the correct amount as recommended on the packaging. Avoid using hand wash detergents in an automatic machine.
Reset the machine
After waiting a few minutes, plug back in, turn the water supply back on and try running a short cycle to see if the error recurs.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Bush washing machine parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the E04 error persists after checking the detergent and resetting the machine, the water inlet valve or pressure sensor is likely faulty and will need to be tested and replaced by a qualified engineer. Internal components should only be inspected or repaired by trained professionals.
Related Bush Washing Machine Error Codes
Bush Washing Machine Error Code E01
Bush Washing Machine Error Code E02
Bush Washing Machine Error Code E03
Error codes may vary between different Bush washing machine models. Always consult the user manual for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.