Hisense Tumble Dryer Error Code E01 Meaning and Possible Fixes
Hisense Tumble Dryer Error Code E01
If your Hisense tumble dryer displays error code E01, the appliance has detected a temperature sensor failure. This is a technical fault that requires professional attention.
View all Hisense tumble dryer error codes
What the E01 Error Code Means
The E01 error code indicates a fault with the temperature sensor — the component that monitors heat levels inside the dryer during the drying cycle. When this sensor fails or gives readings outside the expected range, the machine stops the programme as a safety precaution. Hisense advises disconnecting the dryer from the power supply and contacting a service centre.
Common Reasons This Error Appears
Faulty temperature sensor
The NTC temperature sensor monitoring heat levels inside the dryer has failed and is providing incorrect or no readings to the control board.
Wiring fault
A loose or damaged connection between the temperature sensor and the control board can cause incorrect readings to be reported.
Blocked filters causing abnormal temperature readings
A severely blocked lint filter or condenser can cause abnormal heat build-up that affects sensor readings. Always check and clean the filters before calling an engineer.
Control board fault
An issue with the main electronic control module can affect its ability to correctly read temperature sensor data.
Safe Checks You Can Try
Clean the lint filter and condenser
Before calling an engineer, always check and clean the lint filter. On heat pump models, clean the condenser as well. A blocked filter is the most common cause of dryer faults and should always be checked first.
Power reset
Disconnect the tumble dryer from the mains power supply and leave it unplugged for a few minutes. Reconnect and attempt to restart. A reset can sometimes clear a temporary sensor fault.
If the error persists after cleaning the filters and resetting, the temperature sensor will need to be inspected by a qualified engineer.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Hisense tumble dryer parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
Hisense advises contacting a service centre for E01. An engineer will need to test and replace the temperature sensor or associated wiring.
Internal components should only be inspected or repaired by trained professionals.
Related Hisense Tumble Dryer Error Codes
You may also encounter related issues indicated by Hisense Tumble Dryer Error Code E00 and Hisense Tumble Dryer Error Code E02.
Error codes may vary slightly between different Hisense tumble dryer models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.