How To Reset a Miele Washing Machine

How To Reset a Miele Washing Machine

If your Miele washing machine has stopped mid-cycle, is displaying a fault code, or is not responding correctly, a reset can often resolve temporary faults and restore normal operation. This guide explains how to reset a Miele washing machine and what to do if the fault persists.

View all Miele washing machine fault codes

How To Reset a Miele Washing Machine

The most effective and universally recommended reset method for Miele washing machines is a power reset at the mains:

Step 1
Switch the washing machine off using the on/off button.

Step 2
Switch off at the mains socket and unplug the machine from the wall.

Step 3
Leave the machine unplugged for at least 2 minutes. This allows the control electronics to fully discharge and reset.

Step 4
Plug the machine back in and switch on at the mains socket.

Step 5
Switch the machine on using the on/off button, select your programme and start the cycle.

If the fault code has cleared, the machine should operate normally. If the same fault code reappears, the underlying issue will need to be investigated further.

Cancelling a Programme Mid-Cycle

If you need to stop a programme that is currently running, most Miele washing machines allow you to cancel the cycle by holding the start/stop button for a few seconds. The machine will then pump out any water and unlock the door. Refer to your user manual for the specific method on your model.

What To Do If the Fault Persists

A power reset will clear many temporary faults caused by power fluctuations, software glitches or minor sensor errors. However, if the same fault code appears again after the reset, it indicates an underlying issue that requires further investigation.

Use the fault code displayed on your machine to find out more about what is causing the problem:

Miele washing machine fault codes — complete guide

Some fault codes such as F10, F11, F16, F37, F56 and F92 have user checks you can carry out before calling an engineer. Others indicate technical faults that require professional attention.

When To Contact A Professional

If the fault code persists after a reset and the associated checks have been completed, contact Miele customer service or book a repair appointment. Miele-trained engineers carry the correct diagnostic equipment and genuine parts to resolve the fault correctly.

Internal components should only be inspected or repaired by trained professionals.

How to reset a Miele tumble dryer

How to reset a Miele dishwasher

Browse all Miele appliance fault codes

🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon

♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.