Miele Washing Machine Fault Code F10 Meaning and Possible Fixes
Miele Washing Machine Fault Code F10
If your Miele washing machine displays fault code F10, the appliance has detected that the water inlet is blocked or restricted. The machine cannot fill with water at the required rate and has stopped the programme.
View all Miele washing machine fault codes
What the F10 Fault Code Means
The F10 fault code indicates a water inlet fault. The machine has attempted to fill with water but has not received water at the expected rate or in the expected quantity. This is often caused by a supply issue or a blockage rather than a component failure, and there are several checks you can carry out yourself.
Common Reasons This Fault Appears
Water tap turned off or restricted
The most common cause — if the cold water tap supplying the machine is not fully open, the flow rate will be too low to fill the machine correctly.
Kinked or blocked inlet hose
A bent or compressed inlet hose at the back of the machine will restrict water flow and prevent the machine from filling.
Blocked inlet filter
A mesh filter inside the inlet hose connection can become clogged with debris over time, significantly reducing water flow into the machine.
Low water pressure
If household mains water pressure is too low, the machine may not fill quickly enough and will register an inlet fault.
Faulty water inlet valve
The solenoid valve that controls water entry may have partially or fully failed, preventing sufficient water from entering.
Safe Checks You Can Try
Check the water supply tap
Ensure the tap supplying water to the machine is fully open — turn it anti-clockwise as far as it will go.
Inspect the inlet hose
Check the hose at the back of the machine for any kinks, bends or compression. Straighten if necessary.
Clean the inlet filter
Turn off the water supply and disconnect the inlet hose from the back of the machine. Remove the small mesh filter from the connection and rinse it under running water to remove any debris.
Restart the washing machine
Miele advises terminating the wash programme and restarting after addressing any supply issues. Turn the machine off at the mains for a couple of minutes before restarting.
If You Need Spare Parts
If you are confident carrying out the repair yourself, compatible Miele washing machine parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the F10 fault persists after checking the water supply, hose and inlet filter, the water inlet valve may need to be tested and replaced by a qualified engineer.
Internal components should only be inspected or repaired by trained professionals.
Related Miele Washing Machine Fault Codes
You may also encounter related issues indicated by Miele Washing Machine Fault Code F15 and Miele Washing Machine Fault Code F11.
Fault codes may vary slightly between different Miele washing machine models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.