Electrolux Tumble Dryer Error Code C8 Meaning and Possible Fixes
Electrolux Tumble Dryer Error Code C8
If your Electrolux tumble dryer displays error code C8, it indicates a temperature sensor fault.
Electrolux tumble dryers use temperature sensors to monitor the heat inside the drum during a drying cycle. If the appliance detects a fault with these sensors, it may stop the cycle and display the C8 error code.
View all Electrolux tumble dryer error codes
What the C8 Error Means
The C8 error code generally indicates that the temperature sensor is not operating correctly. This may cause the dryer to overheat, fail to heat up, or stop mid cycle.
Common Reasons This Error Appears
Faulty temperature sensor
The NTC temperature sensor may have failed and is sending incorrect readings to the control board.
Blocked filters
A blocked lint filter or condenser can cause the dryer to overheat, triggering the temperature sensor fault.
Wiring fault
Wiring connected to the temperature sensor or control module may be loose or damaged.
Electronic control board fault
The control board may not be reading the sensor signal correctly.
Safe Checks You Can Try
Clean the lint filter
Remove and clean the lint filter thoroughly. A blocked filter is one of the most common causes of temperature related faults.
Clean the condenser
Remove and rinse the condenser under running water and allow it to dry fully before replacing.
Check ventilation
Make sure the tumble dryer has adequate space around it for ventilation and is not positioned against a wall or in an enclosed space.
Restart the tumble dryer
Turn the appliance off and disconnect it from the mains for several minutes before restarting.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible Electrolux tumble dryer parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the C8 error code continues to appear after trying the checks above, the temperature sensor or electronic control board may need replacing and an engineer visit would be recommended.
Internal components should only be inspected or repaired by trained professionals.
Related Electrolux Tumble Dryer Error Codes
You may also encounter related issues indicated by Electrolux Tumble Dryer Error Code E70 and Electrolux Tumble Dryer Error Code E60.
Error codes may vary slightly between different Electrolux tumble dryer models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.