Electrolux Dishwasher Error Code i70 Meaning and Possible Fixes
Electrolux Dishwasher Error Code i70
If your Electrolux dishwasher displays error code i70, it indicates a temperature sensor fault.
Electrolux dishwashers use a temperature sensor in the sump to monitor the water temperature during a wash cycle. If the appliance detects a fault with this sensor, it may stop the cycle and display the i70 error code.
View all Electrolux dishwasher error codes
What the i70 Error Means
The i70 error code indicates that the temperature sensor in the sump is detecting a defect. This may prevent the dishwasher from heating water correctly or cause it to stop mid cycle.
Common Reasons This Error Appears
Faulty temperature sensor
The NTC temperature sensor in the sump may have failed and is sending incorrect readings to the control board.
Blocked filter or sump
A blocked filter or sump can affect the sensor reading and trigger the fault.
Excess foam
Using too much detergent can cause excess foam which may interfere with the sensor.
Wiring fault
Wiring connected to the temperature sensor or control module may be loose or damaged.
Electronic control board fault
The control board may not be reading the temperature sensor signal correctly.
Safe Checks You Can Try
Clean the filter and sump
Remove and clean the filter at the bottom of the dishwasher thoroughly. Clear any foam or debris from the sump area.
Check the detergent
Make sure you are using the correct dishwasher detergent and not using too much.
Restart the dishwasher
Turn the appliance off and disconnect it from the mains for several minutes before restarting.
Run a new cycle
After resetting, select a programme and run it to see if the error clears.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible Electrolux dishwasher parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the i70 error code continues to appear after trying the checks above, the temperature sensor or electronic control board may need replacing and an engineer visit would be recommended.
Internal components should only be inspected or repaired by trained professionals.
Related Electrolux Dishwasher Error Codes
You may also encounter related issues indicated by Electrolux Dishwasher Error Code i60 and Electrolux Dishwasher Error Code i80.
Error codes may vary slightly between different Electrolux dishwasher models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.