Electrolux Dishwasher Error Code i43 Meaning and Possible Fixes
Electrolux Dishwasher Error Code i43
If your Electrolux dishwasher displays error code i43, it indicates a pressure sensor problem.
Electrolux dishwashers use a pressure sensor to monitor the water level inside the appliance during a wash cycle. If the appliance detects a fault with this sensor or the water level control system, it may stop the cycle and display the i43 error code.
View all Electrolux dishwasher error codes
What the i43 Error Means
The i43 error code indicates a fault with the pressure sensor or water level control system. It is related to the i40 and i44 error codes and may prevent the dishwasher from filling or draining correctly or cause it to stop mid cycle.
Common Reasons This Error Appears
Faulty pressure sensor
The pressure sensor that monitors the water level may have failed or become blocked.
Blocked filter or sump
A blocked filter or sump at the bottom of the dishwasher can affect water levels and trigger the pressure sensor fault.
Excess foam
Using too much detergent or the wrong type can cause excess foam which may interfere with the pressure sensor reading.
Wiring fault
Wiring connected to the pressure sensor or control module may be loose or damaged.
Electronic control board fault
The control board may not be reading the pressure sensor signal correctly.
Safe Checks You Can Try
Clean the filter and sump
Remove and clean the filter at the bottom of the dishwasher thoroughly. Check the sump area for debris.
Check the detergent
Make sure you are using the correct dishwasher detergent and not using too much.
Restart the dishwasher
Turn the appliance off and disconnect it from the mains for approximately 5 minutes before restarting.
Run a new cycle
After resetting, select a programme and run it to see if the error clears.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible Electrolux dishwasher parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the i43 error code continues to appear after trying the checks above, the pressure sensor or electronic control board may need replacing and an engineer visit would be recommended.
Internal components should only be inspected or repaired by trained professionals.
Related Electrolux Dishwasher Error Codes
You may also encounter related issues indicated by Electrolux Dishwasher Error Code i40 and Electrolux Dishwasher Error Code i44.
Error codes may vary slightly between different Electrolux dishwasher models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.