AEG Washing Machine Error Code EF0 Meaning and Possible Fixes
AEG Washing Machine Error Code EF0
If your AEG washing machine displays error code EF0, it indicates a water leakage, over-foaming or imbalanced load problem.
AEG washing machines monitor for a number of conditions that could cause damage or affect performance. If the appliance detects one of these conditions, it may stop the cycle and display the EF0 error code.
View all AEG washing machine error codes
What the EF0 Error Means
The EF0 error code can indicate one of several conditions including a water leak detected in the base of the appliance, excessive foam in the drum, or a heavily imbalanced load during a spin cycle.
Common Reasons This Error Appears
Excess foam
Using too much detergent or the wrong type of detergent can cause excessive foam which triggers the error.
Water leak
A leak from an internal hose, pump or seal may have caused water to collect in the base of the appliance, triggering the flood protection system.
Imbalanced load
A heavily imbalanced load during the spin cycle may have triggered the error. This is common when washing a single heavy item such as a duvet or towel.
Blocked pump filter
A blocked pump filter can cause water to back up and trigger the leak sensor.
Faulty pressure sensor
The pressure sensor may be sending incorrect readings to the control board.
Safe Checks You Can Try
Check the detergent
Make sure you are using the correct type and amount of washing machine detergent. Avoid using washing up liquid or hand wash detergent.
Redistribute the load
If the error occurred during a spin, open the door and redistribute the laundry evenly around the drum before restarting.
Clean the pump filter
Locate the pump filter, usually behind a small panel at the front bottom of the machine, and clean it thoroughly.
Check for visible leaks
Inspect the inlet and drain hoses for any signs of leaking or loose connections.
Restart the washing machine
Turn the appliance off and disconnect it from the mains for several minutes before restarting.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible AEG washing machine parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the EF0 error code continues to appear after trying the checks above, there may be an internal leak or fault that requires an engineer visit.
Internal components should only be inspected or repaired by trained professionals.
Related AEG Washing Machine Error Codes
You may also encounter related issues indicated by AEG Washing Machine Error Code EF3 and AEG Washing Machine Error Code E20.
Error codes may vary slightly between different AEG washing machine models, so always consult the manufacturer documentation for your specific appliance.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.