Beko Dishwasher Error Code E02 – Meaning and Possible Fixes
Beko Dishwasher Error Code E02
If your Beko dishwasher displays Error Code E02, the appliance has detected a problem with the water supply entering the machine.
Dishwashers require a consistent supply of water to begin and maintain a wash cycle. If the control system detects that the dishwasher is not filling correctly, the programme may stop and the E02 error code will appear.
View all Beko dishwasher error codes.
What the E02 Error Means
The E02 error code usually indicates that the dishwasher is not receiving enough water during the filling stage of the cycle.
This may happen if the inlet hose is restricted, the water pressure is too low or a component responsible for filling the appliance is not functioning correctly.
Common Reasons This Error Appears
Water supply turned off
The water tap connected to the dishwasher may be closed or only partially open.
Blocked inlet hose
The water supply hose may be kinked, twisted or blocked which prevents water from entering the appliance.
Clogged inlet filter
Dishwashers often include a small filter where the inlet hose connects. Debris in this filter can restrict water flow.
Faulty water inlet valve
If the valve responsible for allowing water into the appliance is faulty, the dishwasher may fail to fill correctly.
Safe Checks You Can Try
Before contacting a technician, there are several checks you can safely perform.
Check the water tap
Ensure the water supply tap connected to the dishwasher is fully open.
Inspect the inlet hose
Look for kinks, bends or blockages in the water inlet hose.
Clean the inlet filter
If accessible, remove and clean the small filter located where the hose connects to the dishwasher.
Restart the dishwasher
Turn the appliance off, disconnect power for several minutes, then restart a new cycle.
If You Need Spare Parts
If you’re confident carrying out the repair yourself, compatible Beko dishwasher parts are available on Amazon with next day delivery.
Always check your model number before ordering to ensure compatibility.
When To Contact A Professional
If the E02 error code continues to appear after checking the water supply and filters, the issue may involve the inlet valve or internal control system.
Electrical components should only be inspected or repaired by a qualified appliance technician.
Related Beko Dishwasher Error Codes
You may also encounter related issues indicated by Beko Dishwasher Error Code E01, Beko Dishwasher Error Code E03 and Beko Dishwasher Error Code E04.
Error code meanings can vary slightly between models, so always consult your appliance manual if the issue persists.
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.