Whirlpool Tumble Dryer Flashing Lights Error Codes
If your Whirlpool tumble dryer lights are flashing, it usually means the appliance has detected a fault.
This guide explains what different flashing light combinations mean and what you can check before calling an engineer.
Try this first (Quick Reset)
- Turn the tumble dryer off at the mains
- Leave it for 2–3 minutes
- Turn it back on and start a new cycle
This can clear temporary faults.
Whirlpool Tumble Dryer Flashing Light Combinations
LED 4 flashing – Whirlpool Tumble Dryer F01 – Electronic circuit board fault
LED 3 flashing – Whirlpool Tumble Dryer F02 – Motor circuit fault (flashing light)
LED 3 and LED 4 flashing – Whirlpool Tumble Dryer F03 – Temperature sensing fault
LED 2 and LED 4 flashing – Whirlpool Tumble Dryer F05 – Waste pipe blockage or pump issue
LED 2 and LED 3 flashing – Whirlpool Tumble Dryer F06 – Door lock fault
LED 2, LED 3 and LED 4 flashing – Whirlpool Tumble Dryer F07 – Electronic circuit board / heating circuit fault
LED 1 flashing – Whirlpool Tumble Dryer F08 – Heater fault
LED 1 and LED 4 flashing – Whirlpool Tumble Dryer F09 – Software fault
LED 1, LED 2 and LED 4 flashing – Whirlpool Tumble Dryer F11 – Pump circuit fault
LED 1 and LED 2 flashing – Whirlpool Tumble Dryer F12 – Electronic control fault
LED 1, LED 2, LED 3 and LED 4 flashing – Whirlpool Tumble Dryer F15 – Heater control fault
LED 5 flashing – Whirlpool Tumble Dryer F16 – Drum position sensor fault (top loading machines only)
LED 3 flashing (static light scenario) – Whirlpool Tumble Dryer F18 – Internal data error
What To Do If Your Whirlpool Tumble Dryer Lights Are Flashing
If the lights continue to flash after resetting the machine, use the combinations above to identify the fault and follow the full guide for that error code.
These guides explain the likely causes and checks you can carry out.
Common issues linked to flashing lights include:
- Tumble dryer not heating
- Tumble dryer not spinning
- Dryer stopping mid-cycle
- Dryer taking too long to dry
These problems are often connected to the fault codes above.
Why are my tumble dryer lights flashing?
Flashing lights indicate the appliance has detected a fault during operation.
Can I reset my Whirlpool tumble dryer?
Yes – turning it off at the mains for a few minutes can clear temporary faults.
Do flashing lights always mean a serious fault?
Not always – many issues can be resolved with simple checks.
Whirlpool tumble dryer error codes explained
Browse all Whirlpool appliance error codes
🔧 Need a spare part? Find compatible parts for your appliance on Amazon with next day Prime delivery. Please double-check the part is compatible with your specific model before ordering. Find parts on Amazon
♻️ Not worth repairing? If your appliance has had its day, eco-friendly refurbished appliances are available at Renew 2 U — better for your wallet and the planet.